| T O P I C R E V I E W |
| APT |
Posted - 08/28/2009 : 6:29:00 PM
I've always played nylon string guitars ... but now I'm thinking about getting a steel string.
Any recommendations on, say, Martin, Taylor, or Larivee steel string guitars that are conducive to Hawaiian slack key? I'm especially looking for a guitar that is nice and easy to play.
|
| 5 L A T E S T R E P L I E S (Newest First) |
| Mika ele |
Posted - 09/10/2009 : 09:40:25 AM
Kinda lucky here near the Taylor factory. Was able to score a factory second nylon string (CHEEP ) a few years back NS-74ce (rosewood cutaway with electronics) to add to my K-22ce steel string. These two guitars are so similar feeling -- fret spacing and neck width/depth that the only adjustement I need to keep in mind when moving from one to the other is the tonal differences, string tension, and the differences in note sustain. Its the moving back and forth from 6-string tenor (slack key) ukulele to guitar to low-G tenor ukulele that is keeping the brain activity high and my mind young.  |
| Allen M Cary |
Posted - 09/10/2009 : 08:53:18 AM
Won oddah ting--Cutaways are useful for getting to the higher frets in slack, but with steel strings you are usually 14-frets to the body so it's not quite as important as with a 12-fret classical instrument.
Aloha,
Allen |
| FROPPE |
Posted - 08/31/2009 : 5:50:55 PM
I've used a Taylor 615ce, and have been very pleased with the sound and playability (is that a word?). Also, I've been very satisfied with the Elixir strings. Lots of aloha coming out of that big ol' baby. Now, if I could just reduce the wrong (colorful) notes.... |
| Allen M Cary |
Posted - 08/31/2009 : 10:35:01 AM
I have a Taylor 612C that is, to my ear, a great slack key guitar. The important thing is to test play the guitars in all the tunings that you are using. Some will sound better than others in certain tunings. So far my Taylor is pretty good in every one I have tried; it especially likes Taro and Leonard's F (CFCGCE). Also nice in DADGAD and the Irish fiddle Orkany tuning that I picked up at the Healdsburg Festival from Steve Baughman. (I can't remember the notes off the top of my head).
Of course the other considerations are the action (usually adjustable) and the spacing. For instance, unless you have particularly small fingers, you won't like the Taylor Dan Crary for fingerpicking, since he is a flat picker. Same goes for most dreadnoughts.
Best advice though is play and listen. If all else fails, talk to a luthier about a custom ax. |
| rendesvous1840 |
Posted - 08/28/2009 : 6:59:08 PM
My hands don't like the necks on x brand guitars. My ears don't care for the sound of nylon string guitars. This makes me an expert in what? Play as many guitars as you can get your hands on, in your price range,and listen from the heart. Sooner or later the choice will be made from within you. If the choice evades you, sit on your wallet until it can accomodate a larger range. You hafta please your ears and hands, not someone elses.
Paul |
